ENRO-DrillingFoam S50 has the following features:

• May be used in a Variety of Air Drilling Operations, ranging from Simple Air Drilling to Stiff Foam Drilling.

• Generates Instant High Foam Quality of Exceptional Stability.

• Economical, produces Dense, Stable Foam at Low Concentrations.

• Compatible with all types of makeup Water, including Brackish, Salty and Hard water.

• Reduces Erosion when Drilling Poorly Consolidated Formations.

• Reduces Air Requirements and allows Deeper Drilling.

• Reduces the tendency of softer clays to stick together.

• Improves Hole Cleaning and Increases Penetration Rates( facilitates the flotation of Dirt to the Surface).

• Effective in Extending the Life of the Drill Bits(Excellent Lubrication and Corrosion Inhibiting Properties).

​

ENRO-DrillingFoam S50 is suitable/compatible for use in the following Product Classes:

• Mist Drilling: ENRO-DrillingFoam S50   should be mixed with water at 0.2 - 0.5 % by volume and injected into the air stream. NOTE: The Rate of Injection will depend on Hole Size, Compressor Output and Water Flow Rate etc.

• Foam Drilling: ENRO-DrillingFoam S50 should be mixed with water up to 0.5 - 2.0 % by volume, if water flow rates are High and Compressor Limits are reached.

• Air Drilling: ENRO-DrillingFoam S50 can be used as an effective Dust Suppressant, at 0.05 - 0.2 % by volume injection water.

 

ENRO-DrillingFoam S50 is:

• Soluble in water.

​